Macbook Pro Pink Screen Problem(Fixed)

The MacBook Pro Pink Screen issue could be caused by a defective graphics card or display screen malfunction. To check this, connect an external display to your MacBook’s internal display. When the external show is fine, it indicates that there is a hardware issue. Do General Troubleshooting and fix Kernel Panic to Fix Macbook Pro Pink Screen Issue. Reset NVRAM Settings and resolve Third-Party Software Incompatibility issues on MacBook Pro.

If you are facing a pink screen issue then it means that your Mac or laptop’s graphics card is not functioning properly and some values for display ports, and RAM memory modules could be corrupted. We can also confirm this if the brightness of the blue LED is flickering more than it previously did. You can also follow these troubleshooting steps but still get the same results.

How to Fix the MacBook Pro Pink Screen Issue?

  1. Connect an external monitor then run the Apple Hardware Test to check hardware issues.
  2. If you’ve not already done so, install macOS Sierra and perform a clean installation of your Mac OSX by performing a full-erase disk operation with Time Machine or Disk Utility on Windows PC through Boot Camp / VMWare Fusion/ VirtualBox, etc. Instantaneously restart after refilling hard drive space with data back to factory settings once finished – this will correct the display memory module data corruption issue as well as graphics card value mismatches in NVRAM Settings – used for storing bootleg values (DMP) and other important PCI configuration info like RAM Memory location, etc., corruptions would affect those crucial pieces of information stored in NVRAM and may lead to display memory module data corruption issues.
  3. If you’ve already performed a previous macOS software update trying repairing the Dental Central application or any other 3rd party applications that should be compatible with your recovery partition (the one we installed through the latest Bootable Linux/ Es file) – that’s a thing to try if nothing has worked so far.

Macbook Pro Pink Screen

Read our review on Is ThinkPad Good for Programming?

Why is the Mac screen flickering pink?

The screen flickering pink is a result of the Mac operating system trying to compensate for a power loss or spike in voltage.

The problem with this scenario is that it can sometimes cause an abnormal shutdown of your computer if the video card does not reset correctly.

In order to fix this issue, follow these steps:

  1. Shut down your Mac and restart it again after ensuring that the AC power has been plugged in properly and you have removed any external devices from your Mac’s USB ports.
  2. If you still experience the flickering pink screen, try shutting down and then restarting while holding the option key on your keyboard instead of just clicking on Restart or Shutdown from the Apple menu bar on top of your screen.

How to fix MacBook Pro Pink Screen?

You can follow the steps below;

  • First, shut down your MacBook Pro and remove the battery.
  • Then you need to take out the hard drive from the computer by using a screwdriver or even a paperclip.
  • After that, clean off all of the components in order to get rid of any dust that may have accumulated on them.
  • Finally, replace the old hard drive with a new one before reconnecting it back into your MacBook Pro.

Is there any way to fix the Macbook Pro Pink screen besides replacing the screen?

The answer is yes. There are many ways to fix the pink screen of the MacBook.

The best way to fix a pink screen on your Macbook is by replacing the motherboard. However, this may be expensive and not worth it in most cases.

If you have another option, then the best thing that you can do is to replace the logic board or replace the RAM.

How can you prevent MacBook Pro Pink Screen Problem in the future?

There are a few different solutions to the problem.

First, you can go into the system preferences and turn off ‘screensaver’. This will not have any negative impact on your computer or screen.

Second, you can use an external monitor that has a power-saving mode. The power-saving mode should automatically turn off when it detects no movement for about 30 minutes which is perfect for laptops with pink screens.

Read our ultimate guide on How To Fix Pink Screen on Laptop.

Third, you can also buy an external charger with USB-C cables which makes it easier to charge your laptop while using it at the same time without having to disconnect the cable from the computer.


What causes a pink screen on a MacBook Pro?

The pink screen is caused by a faulty Nvidia graphics card.

If you are experiencing this issue, the solution is to replace the graphics card with a new one or to take it in for repair.

How do you fix an iPad with a pink screen?

  • If the iPad is not charging or it’s not showing any signs of life, then try to connect it to a computer with iTunes on and check if there are any updates available for your device.
  • Check whether the cable that you’re using is working properly by connecting the iPad to another device like a laptop or desktop PC which has iTunes installed on it.
  • Ensure that your battery isn’t dead by connecting the charger and turning on the power button until you see a green light come on next to “Power”.
  • Make sure that there isn’t anything blocking the screen from moving when pressing down on the power button so that you can access all corners of your iPad’s display.

Read our review on Are thinkpads good for gaming?

Is the MacBook/MacBook Pro screen fragile?

The MacBook Pro is a powerful laptop with a great design. It has some drawbacks, but it is not fragile.

There are many good points of the MacBook Pro:

  • It has a gorgeous design that will make your workspace look more professional and attractive.
  • The screen size makes it easier to use for video editing and photography tasks.
  • It comes with an amazing battery life of up to 10 hours on one charge which makes it perfect for long-haul flights or days at the office without needing to worry about charging every few hours.

What are the symptoms of a pink screen?

The symptoms of a pink screen are that it is not displaying anything.

This can be caused by the following reasons:

  1. The monitor is on, but there is no video signal coming from the computer’s graphics card.
  2. There may be an issue with the display cable or monitor cable connected to the motherboard or graphics card.
  3. The system may need to be restarted in order for Windows to recognize that it needs to refresh the screen, if this does not work then you will need to do a hard reset on your computer which will require disconnecting all cables and turning off your PC before rebooting it again.

How do I fix a MacBook Air that has screen color lines?

There are a few things that you can do to fix your MacBook Air screen color lines.

First, try restarting the computer and checking if the issue still persists. If it does not, then it is likely a hardware issue and you will need to bring your laptop in for repair.

If this doesn’t work, then you can use some tools such as Display Toolbox or iResolution to try and restore the brightness on your display.

You can also read our review on HP Envy vs Dell Inspiron.

What should I do if my MacBook Pro won’t turn on?

There are many reasons why your MacBook Pro won’t turn on. Some of the most common causes are:

  • It has been dropped and the screen is cracked.
  • The battery is not charging or it is overheating.
  • There is no power to the computer at all.
  • The MagSafe charger port or MagSafe connector isn’t working properly.

My MacBook turns itself on after I turn it off, how do I fix this?

First, you need to determine if the issue is software or hardware related.


This problem could be caused by an application that you have installed on your MacBook. If this is the case, then you can simply uninstall it and restart your MacBook.


If the issue is caused by a hardware failure such as a faulty battery or logic board, then your MacBook will not turn on unless it’s plugged in. You should try unplugging and replugging your device before turning it back on again to see if this helps fix the issue.

Leave a Comment