AutoCAD Electrical 2019 is a handy application that provides an interactive design solution for electrical engineers. Design and make circuits in this version have many new features. It allows the user to intuitively create circuits and then apply specific logic to solve any deficiencies in their design.
I am very excited to announce that AutoCAD Electrical 2019 is now available for download! This release brings many new advancements in electrical design. This is a standalone application that is compatible with 32 Bit and 64 Bit systems.
Overview of AutoCAD Electrical 2019
AutoCAD Electrical 2019 is a powerful and efficient tool for electrical wire routing, power distribution, analysis, and circuit design. It offers an advanced set of features that includes topology optimization/minimization, impedance matching, parallel line modeling with distributed capacitance load models (DCLM), transient voltage fault initiation with single-line to earth ground faults (SLTEGF) simulation in both steady state and time domain modes.
Momentary interruptions; short circuits; partial discharge measurements through the use of standard quasi-peak detectors or general-purpose signal monitors as well as current leakage along conductors caused by insulation breakdowns. It also supports GIS integration such as AutoCAD Map data import: Cadastral maps.
New Library
Library Manager is a new feature in AutoCAD Electrical that will allow users to manage libraries. Users can create, edit and delete library files with this tool. The Library Manager requires the following before it launches:
Ensure all templates are saved as library file types (ELECTRICAL_LIBRARY). This means no templates should be stored externally on drives or servers. These have to be housed within the installation directory of AutoCAD Electrical or they cannot be used for sharing purposes between people who use different versions of AutoCAD Electrical. Any user needs to save their template drawings as an ELECTRICAL_LIBRY file type before opening them up again using a newer version of AutoCAD Electrical.
A NEW library for importing/exporting family components into different formats such as STEP or Solidworks component libraries (*.sldprt).
Distributed Capacitance Load Models (DCLM)
Autodesk has updated the DCLM tool in AutoCAD Electrical 2019 to model more accurately distributed capacitance loads. Previously, it was only able to handle a single point load on an electrical line with a resistance of 0 Ω and inductance of 0 μH; this now includes models for multiple points or oscillating currents.
The new feature also allows users to specify whether they want all nodes in the system modeled as pure reactances (X) or resistors/inductors (R). To conclude, AutoCAD Electrical is one of many engineering software products offered by Autodesk that helps professionals use electric power systems and circuit design better. Besides providing engineers with an affordable way.
Transient Voltage Fault Initiation
One of the new features in AutoCAD Electrical 2019 is Transient Voltage Fault Initiation. The software automates a process that previously required trial and error with an oscilloscope, making it possible to more quickly identify potential power quality problems.
With this feature, the user selects two voltage points, one on each line (in-phase), and then sets either magnitude or duration parameters for how long they should be >1000 volts apart before initiating fault simulation at any point between them. This allows users to simulate all sorts of transient faults including lightning strikes, surges from nearby appliances, as well as equipment failures such as motors which may produce higher voltages than their nominal rating due to arcing during start-up.
Single-Line to Earth Ground Faults (SLTEGF)
Single-Line to Earth Ground Fault (SLTEGF) is an electrical event that occurs when a fault current flows between the phase conductor and the ground.
This type of fault can occur in both overhead power lines or underground cables, as well as at distribution transformer stations. It may also be caused by lightning or another form of natural disaster.
Improved Wire Routing
AutoCAD Electrical 2019 includes new features that improve wire routing. A function called “Eliminate Close” is now available when you’re creating a linear, radial, or helical path for wires to follow on your design drawing. When this option is active, AutoCAD will automatically fill in gaps and convert close intersection points into circular arcs so that the wiring paths are more continuous.
With this feature, you can optimize your designs by saving time during drafting as well as preventing errors due to overlapping lines and crossings of wires at specific intersections.
Improved Wire Routing: You can use the Eliminate Close Functionality found within the Linear, Radial, and Helical Path commands to simplify layouts with less crossing of wires and eliminate potential error
Improved wire routing with a new “pinning” system between wires and cables when importing files (pins are shown on top of objects) which makes it easier to identify potential clashes during the initial stage of your project’s development. Pinned wires can be shifted up, down left, or right by dragging them while holding the Ctrl key;
GIS Integration
AutoCAD Electrical 2019 is now more powerful than ever! If you are looking for an easy-to-use CAD software that has everything you need and wants then look no further. This latest release gives users many new enhancements including markup tools, right-click menu commands, GIS integration, and much more. Read on to find out how this release improves your productivity even when working with complex drawings like HVAC systems.
Circuit Builder for Creating the Electrical Systems
This is a really cool new feature in this version. You can now create circuits and wire them with the click of a button, by selecting two points on the screen. The software computes all needed dimensions automatically for you. This will save hours of work when schematic-level design starts! If you are an electrical engineer or just want to learn more about how this works.
Real-Time Error Checker
The engineering of AutoCAD Electrical 2019 has incorporated a real-time error checker. This is helpful for checking errors that occur in the design process and can be used every time you are designing, editing, or exporting your project to ensure no mistakes were made.
There is an automatic revision control function integrated into the newest edition of AutoCAD Electrical software which automatically stores revisions in different files with their own version number so it’s easy to refer back to them if needed!
This helps keep everything organized and prevents confusion when switching between projects because each file will have its own set of versions stored securely on your computer.
New Features in AutoCAD Electrical 2019
- Engineers can use the Circuit Builder for creating electrical systems.
- Create panels, busways, and cable trays.
- Add cables to the panel or run them on the tray.
- Automatically generate circuit breaker specifications for all circuits in a project.
- Engineers can now use Circuit Builder for creating electrical systems that are well modeled with wires attached to each junction box and power supply point when they’re drawn as part of an assembly.
- The interactive interface gives you control over how many junction boxes and cable lengths you want in your system before generating it automatically.
- There’s no need to manually specify circuit breakers anymore (they get generated automatically), this means more time saving than ever before!
System Requirements for AutoCAD Electrical 2019
Below are the system requirements for AutoCAD Electrical 2019:
- Operating System: Windows 7/8/8.1/10.
- Processor: Intel Dual Core processor or Core i3.
- Memory (RAM): 2GB of RAM is required.
- Hard Disk Space: 5 GB of free space required.